Glass Heat Bed Build Plate For Creality Ender 3/5 Pro 3D Printer 235X235X3mm

Description

Store category
Sign Up Now !
You may also like
Glass Bed Build Plate For Creality Ender 3/Ender 5/Ender 3 Pro 3D Printer
Product Description
Brand
Creality 3D
Type
Print Bed
Compatible Model
Ender 3
Country/Region of Manufacture
China
MPN
Does not apply
Product Characteristics
1.Leveling: Use A4 paper to adjust to the platform and the nozzle till there is obvious hindrance, but to be able to pull.
2.Oily Clean: Severe oil on the surface of the platform will affect
adhesion,if this happened, please heat the bed to 90℃, or put the
printer aways for 8 hours, but the most direct way is to wipe a little
with alcohol.
3.This product acid and alkali resistant, high temperature resistance 400℃.
4.The first layer of the product has a hardness of 0.5H, which is
easier to be scratched, but the scratching does not affect the adhesion
of the models.
5.This product will change color when rubbed repeatedly with alcohol, but will not affect normal use.
6.This product will enhance the viscosity and absorb oil ability of the platform after being slightly wiped with alcohol.
7.Try to avoid repeated touches on the platform by hand to prevent serious sweat from touching the platform.
8.This product is processed with a special process and will never
appear in the glass, good solution to the problem of platform
unevenness.
Temperature settings:
PLA:50-70ºC
PETG: 50-70ºC
Specification:
Material:Special Glass + microporous coatings
Item size:235x235x3mm
Box size:360x350x40mm
Package:
Glass bed*1
Payment
Shipping
Returns
About us
Contact us
Payment
We only accept Paypal.
Shipping
Shipping from US with tracking number
Returns
30 day returns Guaranteed.
About us
We only sell Genuine Creality 3D Printer with Brand logo and model on any component.
Contact us
If you have any problems and suggestion about our products and service,please feel free to contact us at any time through eBay messages,we can help you out by all means.
Feedback
Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing.
Easy to take off models by hand or with a little help from the scrapper for very large models.
Temperature settings for different filaments:
PLA:50-70ºC
PETG: 50-70ºC