Gizmo Dorks 3D Printer Build Plate Blue Tape Kapton Tape PET Tape 6.25" x 100'

Description

Gizmo Dorks 3D Printer Build Plate Blue Tape Kapton Tape PET Tape 6.25″ x 100′
Blue Painter’s Tape
Gizmo Dorks blue painter’s tape is the go-to and cost effective way of covering your 3D printer bed plate. Plastic filament such as ABS or PLA stick well to this tape while also being forgiving enough to let go when your print is finished. The blue printer tape is easy to apply and remove, with strong adhesion. The tape is 6.25 inches wide, so you don’t have to worry about stringing small 1 inch wide tapes together to form zig-zag rows. For most 3D printer beds, you’ll only need one piece of tape. Some larger build platforms might require more than one piece of blue tape. The roll is 100′ long and 6.25″ wide, so one roll will last through plenty of your prints.
Dimensions: 100 feet x 6.25 inches
Plastic filament adheres well but prints come off cleanly
Easy to reapply and remove tape
No lines on print bottoms from multiple pieces of tape
Similar to the tape that comes with Makerbot printers
Kapton Tape
The Gizmo Dorks Kapton tape for 3D printers is an excellent unmatched print surface! This tape works with many different 3D printing bed platforms. The beauty of Kapton tape is the ability of the polyimide film to withstand temperature. Therefore, many 3D printer users love applying this polyimide Kapton tape on 3D printers with heated build platforms. The plastic filament will have full adhesion to the polyimide film at the designated temperature, but it also has self releasing characteristics as the bed cools. Your print will be easy to pop off. Kapton tape is the practical choice for your 3D printer bed.
Dimensions: 100 feet x 6.25 inches
Kapton layer thickness – 1 mil
Adhesive (silicone) layer thickness – 1 mil
Prints adheres well but come off cleanly
Able to withstand high temperature from heated beds
Color – Amber Yellow
PET Tape
Gizmo Dorks PET tape is the highest quality Polyester film available on the market. Polyester PET tape is used for 3D printing where a heated build platform is required. Most consumers use it for printing with ABS or HIPS, but PET tape can also be used for PLA or other exotic 3D filaments. When printing with ABS, sometimes ABS filament does not adhere well to the build platform. Adding Polyester PET tape eliminates this problem by providing a smooth, flat, and clean surface to print on. The best part is that the Polyester tape can be reused many times. ABS filament needs to be printed on a heated build plate, and PET tape transfers heat exceptionally well. Some users say that PET Polyester film is a better alternative because it has better adherence to ABS and lasts longer than Kapton.
Dimensions: 100 feet x 6.25 inches
PET layer thickness: 1 mil
Adhesive layer thickness: 1 mil
Excellent adhesion even at high temperatures
Silicone Adhesive
Can be used with ABS, HIPS, PLA, T-glase, Wood, and other filament
Color: Dark Green
Applying the Tape
The tapes can be applied by unrolling a desired amount and using a straight edge such as a ruler to lay down the tape to keep it free from bubbles. This is known as the dry method.
For the Kapton and PET tape, an additional method known as the wet method could be used. For the Kapton and PET tape, the wet method is similar to the dry method but involves spraying some soapy water underneath the tape. Remove the liquid by squeegee or a straight flat edge such as a ruler. This will also remove any air bubbles. The biggest benefit to the wet method is that you can re-position the tape while it is wet because the liquid allows you to easily slide the tape around. Let the tape fully dry before printing.
Welcome to our eBay store!
Check-Out Now!
Click the Buy it Now button or the Add to Cart button the top of this listing to immediately proceed with our checkout and payment process.
Sales Tax
We are required to collect sales tax on items shipped within California.
Payment
We accept the following forms of payment.
Shipping
All orders with a USA shipping address have
FREE SHIPPING!
Expedited shipping via US Postal Service or via UPS may be available for an additional charge.
Customer Service
Please contact us via the eBay messaging system with any questions.  eBay requires buyers and sellers to correspond via the eBay messaging system.  You can click the “Ask a Question” link at the bottom of this listing to reach us.